Q3210 Tumble Belt Shot Blasting Machine — 600 kg per Batch
The size most job shops settle on: a 600 kg batch, one 15 kW blast wheel, and parts up to 900 mm long and 30 kg each. Held in stock, shipped in 7–10 days from order.

Where the Q3210 sits in the range
The Q326 takes 200 kg per batch and one 7.5 kW wheel. The Q3210 is the step above it: three times the batch, a wheel with twice the power, and a working volume of 0.4 m³ against 0.11. For a shop running small and medium castings, that is usually the difference between cleaning a batch and cleaning a shift's output.
The limits are equally concrete: 30 kg per piece and 900 mm maximum length. A part heavier than that, or one that needs more than a tonne per batch, moves up to the Q3215 — whichcarries two 11 kW wheels and 1,000 kg.
Full specification
| Parameter | Q3210 |
|---|---|
| Roller length | 1,100 mm |
| End disc diameter | Φ1,000 mm |
| Working volume | 0.4 m³ |
| Max. single piece weight | 30 kg |
| Max. workpiece length | 900 mm |
| Max. batch load | 600 kg |
| Shot flow rate | 250 kg/min |
| Blast wheel power | 15 kW |
| Elevator capacity | 16 t/h |
| Separator capacity | 16 t/h |
| Dust extraction air volume | 3,500 m³/h |
| Total installed power | 25 kW |
| Overall dimensions (L×W×H) | 2,450 × 2,200 × 3,300 mm |
Values are the standard build. Wheel power, voltage, liner specification, dust collector and automatic loading can be changed per order.
What 600 kg per batch actually buys you
Batch size is not a headline number — it is a handling decision. A 600 kg batch means the operator loads once and walks away for the cycle, instead of feeding a 200 kg machine three times. On a two-shift operation that is the difference between one man watching a machine and one man running a cell.
It also changes what fits. At 900 mm the Q3210 takes longer castings and short profiles that the Q326 cannot: pump housings, valve bodies, brackets welded in pairs, offcuts that used to be cleaned by hand.
Why we keep this one in stock too
The Q326 and the Q3210 are the two sizes that fit most of the inquiries we receive, so both are built ahead of demand and kept on the floor rather than made to order.
- Delivery: 7–10 days from order to shipment for a stock machine. A custom tumble belt build is around 15 days.
- Inspection before shipment is welcome — the unit you are buying exists before you pay for it.
What is adjustable on a standard machine
- Voltage and frequency — 380V, 460V, 480V or 220–230V, 50 or 60 Hz.
- Automatic loading and unloading — available where the machine feeds a line rather than a single operator.
- Liner specification — rolled manganese in the hot zone, NM500 elsewhere.
- Dust extraction — the machine needs 3,500 m³/h; the filter unit is sized to your shop layout.
Delivery, warranty and spare parts
- Delivery — stock Q3210: 7–10 days to shipment. Custom build: about 15 days.
- Warranty — 1 to 2 years depending on the application, written into the quotation.
- Wear parts — blast wheels, blades and liners ship by air freight, about 7 days to any country.
- Payment — 30% T/T with the order, 70% before shipment.
Questions buyers ask about the Q3210
Q326 or Q3210?
If your batch is under 200 kg and no part exceeds 10 kg or 600 mm, the Q326 does the same work for less power and less floor space. If any of those three numbers is exceeded, the Q326 is out — see Q326 vs Q3210 for the side-by-side.
Can it run smaller batches?
Yes, but a partly filled belt tumbles parts differently and the cycle gets less uniform. If most of your work is 100 kg, buy the smaller machine.
What about parts that must not be dropped?
Then it is the wrong machine type, not the wrong size — a hook machine holds the part instead of tumbling it.
Compare the whole range on the tumble belt product page, or see the entry model on the Q326 page.
Send Your Part Drawing