Hook type machines

Model page

Q3740 — for parts that are tall rather than wide

A Φ1500 × 3200 mm envelope and four blast turbines in a chamber 4,000 mm high. This is the machine for structural columns, transformer tanks, frames and weldments where the height is the problem — a 3 m tall fabrication cannot be handled by a wider but shorter chamber.

Q3740 hook type shot blasting machine

Why four turbines on a 2 m chamber

A 4,000 mm tall chamber has a lot of surface to cover and only one hook position. Two turbines at the top would leave the lower third of a tall part dependent on rotation alone; four turbines spread over the height give each part of the column its own angle of attack as it turns. The ventilation volume reflects the same geometry — 11,000 m³/h against the Q376's 4,000 m³/h — because a taller chamber holds more airborne abrasive and dust.

Full specification

Related: the hook type range · Q376 — Φ1000 × 1000 · which machine type fits your part

ParameterQ3740
Max product size (Φ × H)Φ1500 × 3200 mm
Blast turbines4
Screw conveyor power3 kW
Ventilation volume11,000 m³/h
Cleaning chamber L2,000 mm
Cleaning chamber W2,000 mm
Cleaning chamber H4,000 mm

Designed to standard container dimensions. Non-standard chamber heights, wheel counts or lining schedules are built to order.

The Surabaya project

A Q3740 was installed at PT Quality Works in Surabaya, Indonesia, for structural fabrication work specified to SA 3.0. Two engineers spent seven days on site — installation, commissioning, operator training and the first production runs. The acceptance readings and the reasoning behind the chamber size are written up here: a Q3740 in Surabaya.

Where the Q3740 stops

  • Parts wider than Φ1500 mm on the diagonal — the rotating envelope, not the face, is the limit.
  • Parts taller than 3,200 mm: the next step is the Q3750 at Φ2500 × 4000 mm.
  • High-volume small parts: a tumble belt moves far more tonnage per hour for the same money.

Delivery, warranty and spare parts

  • Built to order — the delivery date is confirmed in the quotation.
  • Warranty 1–2 years depending on the application, written into the quotation.
  • Blast wheels, blades and liners by air freight, about 7 days to most countries.
  • Payment 30% T/T with the order, 70% before shipment.

Questions about the Q3740

Do we need a pit or special foundation?

The chamber sits above floor level on its own frame, but the loaded weight and the anchor pattern have to be checked against your floor. Send the slab drawing with the inquiry and the foundation drawing comes back with the quotation.

Can it run SA 3.0 reliably?

Yes — the Surabaya machine was specified for SA 3.0 and accepted at that grade. Reaching it consistently is a matter of wheel power, abrasive quality and cycle time rather than chamber size.

Can it be shipped in one container?

The Q3740 is designed to standard container dimensions, which is why the chamber is 2,000 × 2,000 mm rather than wider. Anything larger becomes a different shipping category.

Other models in this range

Same machine type, different working envelope. Compare the first dimension against your largest part.