Hook type machines

Model page

Q378 — the largest two-wheel hook machine

Φ1300 × 1200 mm, a 1,800 mm cube chamber, two turbines. The Q378 is where the two-wheel family stops: one size up in the range, the third wheel appears. That makes it the interesting machine — it delivers the biggest envelope you can get without paying for a third blast wheel, its power and its wear parts.

Q378 hook type shot blasting machine on the assembly floor

When two wheels are still enough

A hook machine covers a part by rotating it past the blast stream. Two turbines mounted across the chamber top cover the top and the two long faces; the rotation brings the remaining faces through the same stream. That works until the part gets tall enough that the bottom of it sits outside the effective throw of both wheels — at that point a third wheel is cheaper than a longer cycle.

On the Q378 the practical ceiling is around a 1,300 mm diameter and 1,200 mm height. If your part is a 1,300 mm ring lying flat, fine. If it is a 1,300 mm ring standing on edge and 1,400 mm tall, the third wheel on the Q3710 is doing real work, not padding the spec sheet.

Full specification

ParameterQ378
Max product size (Φ × H)Φ1300 × 1200 mm
Blast turbines2
Screw conveyor power1.5 kW
Ventilation volume5,000 m³/h
Cleaning chamber L1,800 mm
Cleaning chamber W1,800 mm
Cleaning chamber H2,000 mm

Built to standard container dimensions. A taller version of the same chamber, the Q378+, takes the envelope to Φ1500 × 1400 mm without adding a third wheel.

Where it earns its place

  • Pump housings, gearbox casings, valve bodies and medium fabrications that hang and rotate cleanly.
  • Shops running a mix of parts where the biggest job is just past a Q376 but nowhere near a Q3740.
  • Buyers who want the envelope without a third wheel's power draw, spares inventory and floor load.

Delivery, warranty and spare parts

  • Built to order — the delivery date is confirmed in the quotation.
  • Warranty 1–2 years depending on the application.
  • Blast wheels, blades and liners by air freight, about 7 days to most countries.
  • Payment 30% T/T with the order, 70% before shipment.

Questions about the Q378

Q378 or Q378+ — what is the difference?

The chamber height. The Q378 is 2,000 mm and takes parts to Φ1300 × 1200 mm; the Q378+ is 2,200 mm and takes Φ1500 × 1400 mm. Both use two turbines and the same 1.5 kW screw conveyor.

Can I blast a part that is wider than 1,300 mm but short?

Yes, up to the rotating envelope rather than the face dimension: a 1,500 mm long, 400 mm tall part fits if it clears the chamber wall as it turns. Send the drawing and we check the swing.

Is three wheels always better?

No. A third wheel adds installed power, abrasive circulation and a third set of wear parts. If two wheels cover your part at the cycle time you need, the third is cost without benefit.

Related: the hook type range · Q376 — Φ1000 × 1000 · which machine type fits your part

Other models in this range

Same machine type, different working envelope. Compare the first dimension against your largest part.